Black Horse Dhc-2 Turbo Beaver 2250mm 88.5 Wingspan Arf

DHC-2 Turbo Beaver 2250mm (88.5") Wingspan from Black Horse - Balsa Wood ARF - BHBV000

The DHC Beaver was introduced in 1947 by DeHavilland as a single engine, high wing monoplane featuring stresses skin, monocoque construction. By the end of production in 1967, some 1600 aircraft had been produced. The late version presented here is a DHC 2T Turbo Beaver and is a development of the original piston-powered plane. The Beaver has gained a well-deserved reputation as the "workhorse of the north".

The model is scaled to approximately 1:6.7 and attention was paid to a true-to-original appearance and best flight characteristics. The model can be operated using an electric power system or with an internal combustion engine about 20-35cc displacement.

Visit the Official Black Horse DHC-2 Turbo Beaver 2250mm Discussion Thread on HobbySquawk.com for additional photos, videos, reviews, and customer Q&A.

Features:

• High level of prefabrication right out of the box
• Lightweight and strong, laser cut balsa and plywood construction
• Finished in high quality Oracover covering
• Aerofoil section tail surfaces
• Large, scale, pre-hinged fuel tank/battery/servo access hatches with sprung loaded latches
• Painted and detailed cockpit, pilot and interior included
• Fiberglass control horns and clevises
• comprehensive control and fitting accessories included
• Two-part bolt on wing for ease of transport, assembly and storage
• Fiberglass cowl and landing gear covers
• Mounts for both electric and gas power options included
• Fully illustrated instruction manual included and also available for download (see tab above)

Includes:

• Black Horse DHC-2 Turbo Beaver 2250mm (88.5") Wingspan - ARF

Requires (Electric):

• 6 Channel radio - select a minimum 6 channel radio from our Radio Collection
• 6 Channel receiver - select a minimum 6 channel receiver from our Receiver Collection
• 1500 – 2000 Watt Brushless Outrunner Motor - we recommend the Admiral GP20 6320-295Kv Brushless Motor
• 100-120 Amp Brushless ESC - we recommend ZTW Gecko 120A ESC OPTO High Voltage Brushless ESC
• 8-18 Amp UBEC - we recommend ZTW 18A BEC / UBEC
• Electric propeller - we recommend the APC 18x12 Thin Electric Propeller
• 7x 45g standard servos - we recommend HS-625MG
• 6 Cell 22.2V 5000 mAh LiPo Battery with EC5 connector - we recommend Admiral 5000mAh 6S 22.2V 50C LiPo Battery with EC5 Connector
• 6 Cell compatible battery charger - select a minimum 6 cell (6S) charger from our Charger Collection

Requires (Gas):

• Engine: 20 - 35cc 2 or 4-stroke. GT25 2-stroke/ GF-30 4-stroke recommended
• Gas Propeller: 15x8 - 16x10 (2 Stroke) 15x10 - 17x10 (4 Stroke)

Customer Note

Black Horse ARF models are constructed out of balsa wood and plywood. These are not foam models. The assembly of balsa wood ARF aircraft requires basic model building skills including the installation of servos, ESC, and motor (or gas engine).

Product Specifications:

AGE LEVEL : 14 and up

SKILL LEVEL : intermediate

BUILD TIME : 6+ hours

Model Scale	1/7 Scale
Wingspan	2250mm / 88.58in
Length	1675mm /65.94in
Weight	5500g / 12.1lbs
CG (Center of Gravity)	Refer to manual
Power System	6S-compatible 110 size Brushless Outrunner Motor or 20 - 35cc 2 or 4-stroke (required)
Electronic Speed Control	100 - 120A (required)
Propeller / EDF	18x5 - 20x12 (required)
Servos	Electric - 7 x 45g standard (required) Gas - 8 x 45g standard (required)
Landing Gear	Fixed
Required Battery	6S 22.2V 5000mAh LiPo (required)
Required Radio	6+ Channel (required)
Ailerons	Yes
Elevator	Yes
Rudder	Yes
Flaps	Yes
Lights	No
Hinge Type	Fiberglass
Material	Balsa and plywood
Skill Level	Intermediate
Build Time	6+ Hours
Recommended Environment	Outdoors

Black Horse Dhc-2 Turbo Beaver 2250mm 88.5 Wingspan Arf

Source: https://www.motionrc.com/collections/black-horse-airplane-spare-parts/products/black-horse-dhc-2-turbo-beaver-2250mm-88-5-wingspan-arf

Share this post